Tuya 2-channel WiFi LED controller + radio remote control | 12-36V

The WT1 controller is an advanced LED strip controller with a universal design allowing for the operation of 1-colour and  2-colour CCT strips. Dimming and brightening as well as colour (white shade) adjustment is possible. The unit has 2 output channels that can be configured to operate a given lighting set. Control can be achieved via an RF remote control operating in the 2.4 GHz range and via the Tuya app on a smartphone. Controlling with the remote control requires its pairing and using the Tuya app requires the controller to be connected to a Wi-Fi network. The controller is connected to the output of the LED CV power supply and LED strips are attached to its output terminals. Multiple controllers can be controlled with a single remote and up to 10 remote controllers can be attached to a single controller.

TECHNICAL PARAMETERS OF THE CONTROLLER:   

• number of outputs: 2
• Input voltage:  12-36 VDC
• maximum load current: 2x 5A
• Maximum load power:  3x 60W at 12V / 3x 180W at 36V
• connection: screw connectors 0.5-2 mm2
• Compatible power supply type:  CV (constant voltage)
• PWM frequency: 2000 Hz
• range: up to 30 m
• dimensions:  114×38×30 mm
• weight: 50g
• compliance with standards: EMC: EN 301489-1 V2.2.3 / ETSI EN 301 489-17 V3.2.4  / LVD: EN 62368-1:2020+A11:2020  / RED: ETSI EN 300328 V2.2.2
• CE certification
• working temperature: -30...+55ºC
• protections: reverse polarity / overheating / output short circuit / output overload

CHARACTERISTICS:

• connection to the LED CV power supply using a screw connector or DC Jack
• The Tuya app allows you to switch tapes on and off, adjust colour (CCT tape) and brightness
• The type of LED strip must be set by pressing the Match button before starting the smartphone app. The LED strip must be connected according to the drawings.
• A short press of the Match button 3 times will change the brightening/dimming time of the lighting on switch-off and switch-on in the range of 0.5-3 s.
• Operation with single-zone or multi-zone radio remote control (2.4 GHz)
• the possibility of controlling an installation (bell) button to switch the light on and off and adjust the brightness 

CONNECTING THE CONTROLLER TO TUYA APPLICATION

• set the controller in the mode to operate the corresponding LED strip
• quickly press the Match button twice to enter configuration mode, the LED will rapidly flash purple
• press and hold the Match key for 5 s, enter AP configuration mode, the purple LED indicator will start flashing slowly.
• if the Tuya APP network connection is successful, the RUN LED will stop flashing purple and switch on the corresponding light type according to the set configuration: white - DIM, yellow - CCT

PILOT TECHNICAL PARAMETERS:   

• operating frequency: 2.4 GHz
• power supply: CR2032 lithium battery
• range: up to 30 m
• battery life: over 1 year
• dimensions: 156×48×22mm
• weight: 75g
• EMC compliant: ETSI EN 301 489-1 V2.2.3
• ETSI EN 301 489-17 V3.2.4:  x= 0.4269 / y= 0.3949
• LVD compliance: EN 62368-1:2020+A11:2020
• RED Compliance: ETSI EN 300 328 V2.2.2
• CE certification
• operating temperature -30...+55ºC
• working environment: indoors